NON-FERROUS
 
Cover Fluxes Degassers Grain Refiners Modifier Magremover Titanium Boron Master Alloy Strontium Master Alloy Saru Coats Saru Diecoats
 
Cover Fluxes
 
  These fluxes are formulated for preventing formation & removal of oxides and other inclusion. It also prevents molten Aluminium from turning into dross.
     
A-IF Covering and drossing flux for Aluminium Alloys for melting in Crucible/Electric Furnace.
  0.5 -1.0%
     
A-1 Less exothermic than A-1F for reverberatory furnace
0.5 -1.0%
     
A-4 For melting of turning and borings. It prevents oxidation and gas absorption during melting.   5 - 10% or
as per practice
     
A-5 For covering specially for reverberatory furnace.   05. - 1.0%
     
A-6 Covering flux for Al.Mg, Alloy for reverberatory furnace.
  2 - 3%
     
A-8 Furnace cleaning flux, removes oxide build up from furnace wall   used once per week, sprayed on the
dross depending upon oxide build up
     
A-224(50) Drossing flux for A1-Mg Alloys   0.25%
     
A-56 Exothermic Cover Flux For Bogie treatment for general melting for higher recovery of A1-metal from dross.   5 - 10%
     
A-224(1) Injection flux to be used by FLUX FEEDER MACHINE for better drossing and removal of oxides & other inclusions right from bottom of the furnace.  





 
 
 

Home | Profile | Products | Contact Us Copyright 2009 Saru Aikoh All rights reserved